2022-10-01 14:17来源：m.sf1369.com作者：宇宇
方法/步骤
准备好我们需要的EXCEL表格文件
下载快解密码读取工具(FastReader)
打开快解密码读取工具(FastReader)
切换到“OFFICE”选项卡，在“OFFICE文件格式”中选择“EXCEL”
点击“打开文件”按钮打开我们所需要的EXCEL文件
点击“快速”按钮，开始EXCEL表格密码
7
等待几分钟后，提示成功，得到EXCEL表格的密码，我们就可以直接修改被密码保护的EXCEL表格的信息了
1、首先，打开受保护的Excel表格，按“ALT”+“F11”键，弹出如下的界面。2、点击“插入”――“模块”，出现下图3、打开“
”复制文中的代码，粘贴到空白区域；4、点击“F5”运行宏模块，进行密码，出现如下图，密码为图中的圈圈5、经过以上的步骤，此Excel的表格的密码已经自动除去
建议在网上下载一个“PasswareKit”软件进行。
1.搜一下绿色的OfficeKey
2.advanced vba passward recover pro，要注册，要找个已经注册的也不容易
3.用16进制编辑工具，如winhex、ultraedit-32打开X.xls文件，将CMG=，DPB=和GC=后的=替换为.，最后一种最方便。【注意留备份，以免意外！】
解密步骤1：先用Microsoft Office Excel 2003创建一个“2003.xls”的普通方式加密Excel文档。
解密步骤2：然后用Office Password Remover这个在线工具来，1,2,3，3秒之后，就生产一个已经被成功的新Excel文档——2003(DEMO).xls 。
EXCEL工作表保护密码
方法:
1\打开文件
2\工具---宏----录制新宏---输入名字如:aa
3\停止录制(这样得到一个空宏)
4\工具---宏----宏,选aa,点编辑按钮
5\删除窗口中的所有字符(只有几个),替换为下面的内容:(复制吧)
6\关闭编辑窗口
7\工具---宏-----宏,选AllInternalPasswords,运行,确定两次,等2分钟,再确定.OK,没有密码了!!
内容如下：
Public Sub AllInternalPasswords()
' Breaks worksheet and workbook structure passwords. Bob McCormick
' probably originator of base code algorithm modified for coverage
' of workbook structure / windows passwords and for multiple passwords
'
' Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1)
' Modified 2003-Apr-04 by JEM: All msgs to constants, and
' eliminate one Exit Sub (Version 1.1.1)
' Reveals hashed passwords NOT original passwords
Const DBLSPACE As String = vbNewLine & vbNewLine
Const AUTHORS As String = DBLSPACE & vbNewLine & _
Adapted from Bob McCormick base code by & _
Norman Harker and JE McGimpsey
Const HEADER As String = AllInternalPasswords User Message
Const VERSION As String = DBLSPACE & Version 1.1.1 2003-Apr-04
Const REPBACK As String = DBLSPACE & Please report failure & _
to the microsoft.public.excel.programming newsgroup.
Const ALLCLEAR As String = DBLSPACE & The workbook should & _
now be free of all password protection, so make sure you: & _
DBLSPACE & SAVE IT NOW! & DBLSPACE & and also & _
DBLSPACE & BACKUP!, BACKUP!!, BACKUP!!! & _
DBLSPACE & Also, remember that the password was & _
put there for a reason. Don't stuff up crucial formulas & _
or data. & DBLSPACE & Access and use of some data & _
may be an offense. If in doubt, don't.
Const MSGNOPWORDS1 As String = There were no passwords on & _
sheets, or workbook structure or windows. & AUTHORS & VERSION
Const MSGNOPWORDS2 As String = There was no protection to & _
workbook structure or windows. & DBLSPACE & _
Proceeding to unprotect sheets. & AUTHORS & VERSION
Const MSGTAKETIME As String = After pressing OK button this & _
will take some time. & DBLSPACE & Amount of time & _
depends on how many different passwords, the & _
passwords, and your computer's specification. & DBLSPACE & _
Just be patient! Make me a coffee! & AUTHORS & VERSION
Const MSGPWORDFOUND1 As String = You had a Worksheet & _
Structure or Windows Password set. & DBLSPACE & _
The password found was: & DBLSPACE & $$ & DBLSPACE & _
Note it down for potential future use in other workbooks by & _
the same person who set this password. & DBLSPACE & _
Now to check and clear other passwords. & AUTHORS & VERSION
Const MSGPWORDFOUND2 As String = You had a Worksheet & _
password set. & DBLSPACE & The password found was: & _
DBLSPACE & $$ & DBLSPACE & Note it down for potential & _
future use in other workbooks by same person who & _
set this password. & DBLSPACE & Now to check and clear & _
other passwords. & AUTHORS & VERSION
Const MSGONLYONE As String = Only structure / windows & _
protected with the password that was just found. & _
ALLCLEAR & AUTHORS & VERSION & REPBACK
Dim w1 As Worksheet, w2 As Worksheet
Dim i As Integer, j As Integer, k As Integer, l As Integer
Dim m As Integer, n As Integer, i1 As Integer, i2 As Integer
Dim i3 As Integer, i4 As Integer, i5 As Integer, i6 As Integer
Dim PWord1 As String
Dim ShTag As Boolean, WinTag As Boolean
Application.ScreenUpdating = False
With ActiveWorkbook
WinTag = .ProtectStructure Or .ProtectWindows
End With
ShTag = False
For Each w1 In Worksheets
ShTag = ShTag Or w1.ProtectContents
Next w1
If Not ShTag And Not WinTag Then
MsgBox MSGNOPWORDS1, vbInformation, HEADER
Exit Sub
End If
MsgBox MSGTAKETIME, vbInformation, HEADER
If Not WinTag Then
MsgBox MSGNOPWORDS2, vbInformation, HEADER
Else
On Error Resume Next
Do 'dummy do loop
For i = 65 To 66: For j = 65 To 66: For k = 65 To 66
For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66
For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66
For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126
With ActiveWorkbook
.Unprotect Chr(i) & Chr(j) & Chr(k) & _
Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _
Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
If .ProtectStructure = False And _
.ProtectWindows = False Then
PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _
Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
MsgBox Application.Substitute(MSGPWORDFOUND1, _
$$, PWord1), vbInformation, HEADER
Exit Do 'Bypass all for...nexts
End If
End With
Next: Next: Next: Next: Next: Next
Next: Next: Next: Next: Next: Next
Loop Until True
On Error GoTo 0
End If
If WinTag And Not ShTag Then
MsgBox MSGONLYONE, vbInformation, HEADER
Exit Sub
End If
On Error Resume Next
For Each w1 In Worksheets
'Attempt clearance with PWord1
w1.Unprotect PWord1
Next w1
On Error GoTo 0
ShTag = False
For Each w1 In Worksheets
'Checks for all clear ShTag triggered to 1 if not.
ShTag = ShTag Or w1.ProtectContents
Next w1
If ShTag Then
For Each w1 In Worksheets
With w1
If .ProtectContents Then
On Error Resume Next
Do 'Dummy do loop
For i = 65 To 66: For j = 65 To 66: For k = 65 To 66
For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66
For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66
For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126
.Unprotect Chr(i) & Chr(j) & Chr(k) & _
Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
If Not .ProtectContents Then
PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _
Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
MsgBox Application.Substitute(MSGPWORDFOUND2, _
$$, PWord1), vbInformation, HEADER
'leverage finding Pword by trying on other sheets
For Each w2 In Worksheets
w2.Unprotect PWord1
Next w2
Exit Do 'Bypass all for...nexts
End If
Next: Next: Next: Next: Next: Next
Next: Next: Next: Next: Next: Next
Loop Until True
On Error GoTo 0
End If
End With
Next w1
End If
MsgBox ALLCLEAR & AUTHORS & VERSION & REPBACK, vbInformation, HEADER
End Sub
